CNC MACHINERIES
CNC TURNING CENTER
 |
|---|
 AT15 |
 AT20 |
 AT25 |
 QT15 |
 QT20 |
 QT25 |
 MT15 |
 TS-15 SUB SPINDLE |
 TL640 |
 ATM-20S |
QT 20
Model |
QT20 |
| Max. Swing Over Bed | 325 mm. |
| Max. Tuening Dia. | 260 mm. |
| Max.Bar Working Dia. | 42.0 mm. |
| Max. Turning Length | 210 mm. |
| Collet Chuck Type | Marquart KK5-173E/42B |
| 3 Jaws Power Chuck | 6 inch |
| Travel & Feed | |
| X axis Travel | 225 mm. |
| Z axis Travel | 250 mm. |
| X axis Rapid Speed | 15 M/min |
| Z axis Rapid Speed | 15 M/min. |
| Cutting Feed | 0015 - 5000 mm/min |
| X axis Servo Motor | Misubishi AC Servi 1.0 KW |
| Z axis Servo Motor | Misubishi AC Servi 1.0 KW |
| A.T.C System | |
| A.T.C System | 12 Position High Speed Turret |
| Number of Station | 12 Tools |
| Index Time | 0.6 sec(one)/1.8(full) |
| Tools Shank Size | 20 mm. |
| Boring Bar | 20 mm. |
| Spindle | |
| Spindle Nose | ISO(DIN)A2-5 |
| Spindle Speed Range | 100 - 4000 rpm. |
| Spindle Motor | Inverter 5.5 Kw. |
| Bed | |
| Width of Bed | 275 mm. |
| Bed Slant Angle | Flat Type 90 |
| Hydraulic System | |
| Hydraulic Motor | 2 HP. |
| Tank Capacity | 60 Liter |
| Max. Pressure | 500 psi |
| Lubricant Motor | 25 W |
| Tank Capacity | 2 Liter |
| Coolant Tank Capacity | 100 Liter |
| Coolant Motor Type | 1/2 HP High Pressure |
| Machine Size | |
| Machine Length | 2650 mm. |
| Machine Width | 1450 mm. |
| Machine Height | 1700 mm. |
| Machine Weigth | 2500 Kg. |
| CNC Controller | |
| Control System | Supper-2000 I.S.PC Digital |
| Control Axis | 3+1 Axis |
| Sync Axis | 3 Axis |
| External Interface | RS-232 & 3.5"Floppy Disk |
| Sub-Program Jumping | 16 Layers |
| Program Memory Size | 8 Mbyte |
Copyright 2005 All Arm Co., Ltd. All rights reserved.