CNC MACHINERIES CNC TURNING CENTER
CNC MACHINERIES
CNC TURNING CENTER
 |
|---|
 AT15 |
 AT20 |
 AT25 |
 QT15 |
 QT20 |
 QT25 |
 MT15 |
 TS-15 SUB SPINDLE |
 TL640 |
 ATM-20S |
AT- 25
Model |
AT- 25 |
| Capacity | |
| Max. Swing over Bed | 200 mm |
| Max. Turning Dia. | 150 mm |
| Max. Bar Working Dia. | 60.0 mm |
| Max. Turning Length | 225 mm |
| Collet Chuck Type | Marquart KK6-185E/60B (G.M.) |
| 3 Jaws Power Chuck | 8" |
| Travel & Feed | |
| X axis Travel | 225 mm |
| Y axis Travel | 250 mm |
| Z axis Travel | 255 mm |
| X axis Rapid Speed | 15 M/min |
| Y axis Rapid Speed | 15 M/min |
| Z axis Rapid Speed | 15 M/min |
| Cutting Feed | 0015 ~ 5000 mm/min |
| X axis SurvoMotor. | Mitsubushi AC Survo 1.0 KW |
| Y axis SurvoMotor. | Mitsubushi AC Survo 1.0 KW |
| Z axis ServoMotor | Mitsubushi AC Survo 1.0 KW |
| A.T.C. System | |
| A.T.C. System | Servo Control "Y" Axis |
| Number of Station | 9 Tools |
| Index Time | 0.2 sec (one) /0.7 (full) |
| Tools Shank Size | 16/20 mm |
| Boring Bar | 20/25 mm |
| Spindle | |
| Spindle Nose | ISO (DIN) A2-6 |
| Spindle Bearing Dia. | 140 mm/90 mm |
| Spindle Bore | 62 mm |
| Spindle Speed Range | 100 ~ 3000 rpm |
| Spindle Motor | Inverter 7.5 Kw |
| Bed | |
| Width of Bed | 250 mm |
| Bed Slant Angle | 3 Axis Flat Gain Type |
| Hydraulic System | |
| Tank Capacity | 60 L |
| Hydraulic Motor | 1 HP |
| Max.Pressure | 400 psi |
| Lubrication | |
| Lubricant Motor | 25 W |
| Tank Capacity | 2 Liter |
| Coolant System | |
| Coolant Tank Capacity | 100 Liter |
| Coolant Motor Type | 1/2 HP Coolant Pump |
| Machine Size | |
| Machine Length | 2600 mm |
| Machine Width | 1450 mm |
| Machine Height | 1700 mm |
| Machine Weight | 2550 Kg |
| CNC Controller | |
| Control System | SUPPER -2000 I.S.PC Digital. |
| Control Axes. | 4+1 Axis |
| Sync Axes. | 4 Axis |
| Encoder Feedback Count | 8192 (out) / 65536 (in) |
| Max. Command Value | 99999999Puls+99999999Puls |
| External Interface | RS-232 & 3.5" Floppy Disk |
| Sub-Program Jumping | 16 Layers |
| Program Memory Size | 32 Mbyte<1600 M> |
| Program Storage | Memout External Upload |
| Position Pulse Output | CW. CCW. |
| Ambient Temperature | 0 ~ 65?C 20 ~ 92% RH |
| Optional Equipment | |
| Spindle Range 0~6000 rpm | 7.5 K Mitsubishi Servo Spindle |
| Tail-Stock | Servo Control Axis |
| Tail-Stock Travel | 225 mm |
| Motion Command | G-Code <G00, G01, G83,...> |
| Tail-Stock Shank Size | ER-25/ER-32 |
Copyright 2005 All Arm Co., Ltd. All rights reserved.