CNC MACHINERIES CNC TURNING CENTER
CNC MACHINERIES
CNC TURNING CENTER
 |
|---|
 AT15 |
 AT20 |
 AT25 |
 QT15 |
 QT20 |
 QT25 |
 MT15 |
 TS-15 SUB SPINDLE |
 TL640 |
 ATM-20S |
TL- 640
Model |
TL-640 |
| Capacity | |
| Max. Swing Over Bed | 410 mm(15") |
| Swing Over Cross Slide | 250 mm |
| Guard | Full |
| Centre Height | 200 mm |
| Distance Between Centre | 1000 mm |
| Chuck Type of Spindle | 3-Jaw 6" (DIN. A2-5) |
| Spindle Motor | 7.5 HP Inverter (MITSUBISHI) |
| Spindle Speed rpm. | High. 600 ~ 3000rpm Low 50~800rpm |
| Spindle Nose | ASA D1-6 |
| Spindle Bore | 58 mm |
| Spindle Front Bearing Bore | 90 mm |
| X Axis Motor | 1Kw AC Servo (MITSUBISHI) |
| Z Axis Motor | 1Kw AC Servo (MITSUBISHI) |
| Longitudinal Woring Stroke | 850 mm |
| Transverse Woring Stroke | 210 mm (8-?") |
| Rapid Traverse (X/Z) | 7.5 m/min |
| Rang of Feeds | 0.01 mm/rev ~ 500 mm/rev |
| Tail-stock Barrel Stroke | 58 mm (2-?") |
| Tail-stock Barrel Stroke | 127 mm (5") |
| Morse Taper in Barrel | MT4 |
| Machine Dimensions | 2950 x 1200 x 1800 mm. |
| Packing Dimensions | 3600 x 1320 x 2100 mm. |
| Approx. Machine Weight | 1800 Kg |
| Tool Magazine | 4T Manual // Option 8 Position Turret |
| Control System | Mic 2000 I.S.PC |
| Control Axes | 2 axes and 1 spindle |
| Sync.Axis | 225 mm |
| Max. command Value | 99999999 pulse |
| Special Competency Accessories | |
| External expand | I/O 24 input/24 output |
| External expand relay | 12 input/12 output |
| Clamping system | Hydraulic 3-Jaw chunk |
| Turret Type | CLT-63-8T |
Copyright 2005 All Arm Co., Ltd. All rights reserved.