CNC MACHINERIES
CNC TURNING CENTER
AT15 |
---|
AT20 |
AT25 |
QT15 |
QT20 |
QT25 |
MT15 |
TS-15 SUB SPINDLE |
TL640 |
ATM-20S |
QT 25
Model |
QT-25 |
Max. Swing Over Bed | 325 mm. |
Max. Tuening Dia. | 260 mm. |
Max.Bar Working Dia. | 60.0 mm. |
Max. Turning Length | 210 mm. |
Collet Chuck Type | Marquart KK6-185E/60B (G.M.) |
3 Jaws Power Chuck | 8 inch |
Travel & Feed | |
X axis Travel | 225 mm. |
Z axis Travel | 250 mm. |
X axis Rapid Speed | 15 M/min |
Z axis Rapid Speed | 15 M/min. |
Cutting Feed | 0015 - 5000 mm/min |
X axis Servo Motor | Misubishi AC Servo 1.0 KW |
Z axis Servo Motor | Misubishi AC Servo 1.0 KW |
A.T.C System | |
A.T.C System | 12 Position High Speed Turret |
Number of Station | 12 Tools |
Index Time | 0.8 sec (one)/2.0(full) |
Tools Shank Size | 20 mm. |
Boring Bar | 20 mm. |
Spindle | |
Spindle Nose | ISO(DIN)A2-6 |
Spindle Bearing Dia. | 140 mm/90 mm |
Spindle Bore | 62 mm |
Spindle Speed Range | 100 - 3000 rpm. |
Spindle Motor | Inverter 7.5 Kw. |
Bed | |
Width of Bed | 275 mm. |
Bed Slant Angle | Flat Type 90? |
Hydraulic System | |
Hydraulic Motor | 2 HP. |
Tank Capacity | 60 Liter |
Max. Pressure | 500 psi |
Lubrication | |
Lubricant Motor | 25 W |
Tank Capacity | 2 Liter |
Coolant System | |
Coolant Tank Capacity | 100 Liter |
Coolant Motor Type | 1/2 HP High Pressure |
Machine Size | |
Machine Length | 2650 mm. |
Machine Width | 1550 mm. |
Machine Height | 1750 mm. |
Machine Weight | 2650 Kg. |
CNC Controller | |
Control System | Supper-2000 I.S.PC Digital |
Control Axis | 3+1 Axis |
Sync Axis | 3 Axis |
Encoder Feedback Count | 8192 (out) /65536 (in) |
Max. Command Value | 999999999 Puls |
External Interface | RS-232 & 3.5"Floppy Disk |
Sub-Program Jumping | 16 Layers |
Program Memory Size | 32 Mbyte <1600 M> |
Program Storage | Memout External Upload |
Position Pulse Output | CW. CCW. |
Ambient Temperature | 0 ~ 65?C 20 ~ 92% RH |
Optional Equipment | |
A.T.C. System | 12 Position VDI-25 Turret |
Tools Shank Size | VDI-25/20 mm |
Boring Bar | VDI-25/25 mm |
Spindle Range 0~6000 rpm | 7.5K Mitsubishi Servo Spindle |
Tail-Stock | Servo Motor Axis |
Tail-Stock Travel | 225 mm |
Motion Command | G-Code <G00, G01, G83...> |
Tail-Stock Shank Size | ER-25/ER-32 |
Copyright 2005 All Arm Co., Ltd. All rights reserved.