NC Rotary Table
Specification/Model | TD-125(-V) | TD-170(-V) | TD-200(-V) | TD-255P(-V) | |
Use Method | Vertical Horizontal use (-V Vertical use only) | ||||
Clamp Method | Pneumatic 5kg/cm² | Pneumatic 5kg/cm² | Pneumatic 5kg/cm² | Pneumatic 5kg/cm² | |
Faceplate Dimension | ? 125 | ? 170 | ? 200 | ? 255 | |
Spindle Through Hole Diameter | ? 22 | ? 45 | ? 45 | ? 80 | |
Faceplate Center Hole Diameter | ? 40H7 | ? 50H7 | ? 50H7 | ? 80H7 | |
Center High | 110 | 135 | 160 | 160 | |
Faceplate T Slot Width | 12H7 | 12H7 | 12H7 | 12H7 | |
Position Key | 14H7 | 14H7 | 18H7 | 18H7 | |
Servo Motor | FANUC | a 1/a 2 | a 3 | a 3 | a 6 |
MELDAS | HA22/33 | HA40/HC052 | HA40/HC102 | HA80/HC152(102) | |
Total Speed Reduction Ratio | 1/90 | 1/90 | 1/90 | 1/180 | |
Max.Speed (rpm) | Motor 2000rpm | 22.2 | 22.2 | 22.2 | 11.1 |
Motor 3000rpm | 33.3 | 33.3 | 33.3 | 16.7 | |
Min. Increment unit | 0.001º | 0.001º | 0.001º | 0.001º | |
Indexing Accuracy (Cumulative) (Arc. Sec) | 45 | 30 | 30 | 15 | |
Repeatability (Arc. Sec) | 4 | 4 | 4 | 4 | |
Clamp Force (kgf/m) | 8 | 16 | 16 | 45 | |
Max. Torque Capacity of Worm Gear (kgf/m) | 15 | 27 | 27 | 48 | |
Max. Workpiece of Capacity (Kg) | Vertical (WithTailstock) | 50 (100) | 75 (150) | 75 (150) | 100 (250) |
Horizontal | 100 | 150 | 150 | 250 | |
Net Weight (Without motor) (Kg) | 38 | 40 | 60 | 130 |
Copyright 2005 All Arm Co., Ltd. All rights reserved.