Milling And Drilling

Model. DIY1018
1. Main specifications for turning operation
Height of spindle centers	125 mm
Max. Swing diameter over bed	250
Max. workpiece diameter over carriage	130
Max. length of workpiece between centres	450
Max. length cutting	420
Spindle bore	27
Taper of hole in spindle	Morse No.4
Number of spindle rotating speed	6 steps
Range of spindle speed (forward-reverse)	115-1620 r.p.m
Number of metric screw thread	20 Kinds
Metric screw thread range	0.2-3.5
Number of inch screw thread	20 Kinds
Inch screw therad range	8-56 t.p.i.
Number of model screw thread	10 Kinds
Model screw thread range	0.2-1.25
Range of carriage/Number of longitudinal feed	0.05,0.1/2
Distance from spindle centre line to bottom surface of square head	15
Max. Swivel angulity of tool slide	45 degree
Travel of every screw division of cross slide	0.04
Travel of every screw division of tool slide	0.04
Max. Longitudinal travel of tool slide	70
Max. transverse travel of cross slide	115
Tape of hole in tailstock sleeve Morse	No.2
Max. travel of tailstock sleeve	70
Motor	0.37 kw, 220 v, 50 Hz
2. Main specifications for drilling and milling operation
Max. drilling diameter	16
Max. diameter of vertical milling cutter	20
Max. diameter of vertical milling face	63
Distance from spindle axis to the surface column	165
Diameter of column	70
Max. distance between spindle and table surface	160
Max. quill movement of spindle	80
Taper of hole in spindle nose	Morse No.3
Number of step of spindle and its range of speed	4 steps,400-1640 r.p.m
Max. horizontal rotaion of spindle box around column	90 degree
Max. inclination of spindle box(left and right)	90 degree
Value of every hand feeding dial scale	1
Value of every hand microfeeding scale	0.05
Working surface of table(WXL)	215X150
Numker of T-slot and its wide of working table	3steps,10
Motor	0.37kw, 220v, 50Hz