| Specification/Model |
TD-125(-V) |
TD-170(-V) |
TD-200(-V) |
TD-255P(-V) |
| Use Method |
Vertical Horizontal use (-V Vertical use only) |
| Clamp Method |
Pneumatic 5kg/cm |
Pneumatic 5kg/cm |
Pneumatic 5kg/cm |
Pneumatic 5kg/cm |
| Faceplate Dimension |
125 |
170 |
200 |
255 |
| Spindle Through Hole Diameter |
22 |
45 |
45 |
80 |
| Faceplate Center Hole Diameter |
40H7 |
50H7 |
50H7 |
80H7 |
| Center High |
110 |
135 |
160 |
160 |
| Faceplate T Slot Width |
12H7 |
12H7 |
12H7 |
12H7 |
| Position Key |
14H7 |
14H7 |
18H7 |
18H7 |
| Servo Motor |
FANUC |
a 1/a 2 |
a 3 |
a 3 |
a 6 |
| MELDAS |
HA22/33 |
HA40/HC052 |
HA40/HC102 |
HA80/HC152(102) |
| Total Speed Reduction Ratio |
1/90 |
1/90 |
1/90 |
1/180 |
| Max.Speed (rpm) |
Motor 2000rpm |
22.2 |
22.2 |
22.2 |
11.1 |
| Motor 3000rpm |
33.3 |
33.3 |
33.3 |
16.7 |
| Min. Increment unit |
0.001 |
0.001 |
0.001 |
0.001 |
| Indexing Accuracy (Cumulative) (Arc. Sec) |
45 |
30 |
30 |
15 |
| Repeatability (Arc. Sec) |
4 |
4 |
4 |
4 |
| Clamp Force (kgf/m) |
8 |
16 |
16 |
45 |
| Max. Torque Capacity of Worm Gear (kgf/m) |
15 |
27 |
27 |
48 |
| Max. Workpiece of Capacity (Kg) |
Vertical (WithTailstock) |
50 (100) |
75 (150) |
75 (150) |
100 (250) |
| Horizontal |
100 |
150 |
150 |
250 |
| Net Weight (Without motor) (Kg) |
38 |
40 |
60 |
130 |
